Windows NT Using DLC Protocol
Before you begin you will need to know the LAN card name and MAC Address. This information is included on the configuration page. See “Print a Configuration Page” on page
The following steps summarize how to connect your Silentwriter.
1.Install software.
2.Identify the printer.
3.Establish the printer on the network. These are described in detail below.
Install the Software
1.From Windows NT open the Main icon.
2.Open the Control Panel icon, then select the Network control panel.
3.If DLC Protocol is not listed under Installed Network Software, select Add Software from the Network Settings dialog box. Otherwise, skip to step 6.
4.Select DLC Protocol from the Add Software dialog box. Click Continue.
5.You will need your Windows NT system diskettes or
6.Select OK to leave the Network Settings dialog box.
7.If you have just installed DLC Protocol, restart your computer.
