4–10 1765 Network Printer Configuration Guide
Set the LAN Card Password
note: If you defined a password as described in step
11 on page 4-8 you need to follow steps 24 to 32 below
to define a password for the LAN card. Otherwise, turn
to “Enable the Remote Printer” on page4-11. If you
define a password for the LAN card, make sure
the password for the LAN card matches the password
defined in PCONSOLE before printing to the
Silentwriter.
24. Open the NEC 1765 Administration software for
NetWare.
25. Select the printer from the printer list in the Printer
Administration window.
26. Click the NetWare button in the Printer
Administration window.
27. Click the Change Password button in the NetWare
Configuration dialog box (A).
28. Type the new password in the New Password text
box in the Change Password dialog box.
29. Retype the new password in the Confirm Password
text box in the Change Password dialog box.
30. Click the Save button from the Change Password
window to close the dialog box (B).
31. Click the Save button from the NetWare
Configuration window to close the dialog box (C).
32. Click the Exit button from the Printer
Administration window.
AB
C
Set the LAN Card Password