
User’s Manual of
4.8.6 Bandwidth Control
Configure the switch port rate limit for Policers and Shapers on this page. The settings relate to the currently selected stack unit, as reflected by the page header. The screen Bandwidth Control in Figure
Figure 4-8-13 XXXXXXX page screenshot
The page includes the following fields:
|
|
|
Object | Description | |
• | Port | The logical port for the settings contained in the same row. |
|
|
|
• | Policer Enabled | Enable or disable the port policer. The default value is "Disabled". |
|
|
|
• | Policer Rate | Configure the rate for the port policer. The default value is "500". This value is |
|
| restricted to |
|
| |
|
|
|
• | Policer Unit | Configure the unit of measure for the port policer rate as kbps or Mbps. The |
|
| default value is "kbps". |
|
|
|
• | Shaper Enabled | Enable or disable the port shaper. The default value is "Disabled". |
|
|
|
• | Shaper Rate | Configure the rate for the port shaper. The default value is "500". This value is |
|
| restricted to |
|
| |
|
|
|
• | Shaper Unit | Configure the unit of measure for the port shaper rate as kbps or Mbps. The |
|
| default value is "kbps". |
|
|
|
|
|
|
130