Planet Technology WGSW-24040R, SGSW-24040R user manual Accessing the CLI, Logon to the Console

User’s Manual of WGSW-24040 / WGSW-24040R

SGSW-24040 / SGSW-24040R

5. COMMAND LINE INTERFACE

5.1 Accessing the CLI

When accessing the management interface for the switch over a direct connection to the server’s console port, or via a Telnet connection, the switch can be managed by entering command keywords and parameters at the prompt. Using the switch's command-line interface (CLI) is very similar to entering commands on a UNIX system.

This chapter describes how to use the Command Line Interface (CLI).

Logon to the Console

Once the terminal has connected to the device, power on the WGSW / SGSW Managed Switch, the terminal will display that it is running testing procedures.

Then, the following message asks the login password. The factory default password as following and the login screen in Figure 5-1appears.

Password: admin

Figure 5-1WGSW / SGSW Managed Switch Console Login screen

208