
User’s Manual of
4.5.1 Static Aggregation Configuration
This page is used to configure the Aggregation hash mode and the aggregation group. The aggregation hash mode settings are global, whereas the aggregation group relate to the currently selected stack unit, as reflected by the page header.
Hash Code Contributors
Figure 4-5-2 Aggregation Mode Configuration page screenshot
ObjectDescription
•Source MAC Address The Source MAC address can be used to calculate the destination port for the frame. Check to enable the use of the Source MAC address, or uncheck to disable. By default, Source MAC Address is enabled.
• | Destination MAC | The Destination MAC Address can be used to calculate the destination port for |
| Address | the frame. Check to enable the use of the Destination MAC Address, or uncheck |
|
| to disable. By default, Destination MAC Address is disabled. |
|
|
|
• | IP Address | The IP address can be used to calculate the destination port for the frame. Check |
|
| to enable the use of the IP Address, or uncheck to disable. By default, IP Address |
|
| is enabled. |
•TCP/UDP Port Number The TCP/UDP port number can be used to calculate the destination port for the frame. Check to enable the use of the TCP/UDP Port Number, or uncheck to disable. By default, TCP/UDP Port Number is enabled.
Static Aggregation Group Configuration
The Aggregation Group Configuration screen in Figure
87