Planet Technology SGSW-24040R, WGSW-24040R user manual „ ARP Parameters, ARP/ Rarp

User’s Manual of WGSW-24040 / WGSW-24040R

SGSW-24040 / SGSW-24040R

„ARP Parameters

The ARP parameters can be configured when Frame Type "ARP" is selected.

Object		Description
•	ARP/RARP	Specify the available ARP/RARP opcode (OP) flag for this ACE.
			• Any: No ARP/RARP OP flag is specified. (OP is "don't-care".)
			• ARP: Frame must have ARP/RARP opcode set to ARP.
			• RARP: Frame must have ARP/RARP opcode set to RARP.
			• Other: Frame has unknown ARP/RARP Opcode flag.
•	Request/Reply	Specify the available ARP/RARP opcode (OP) flag for this ACE.
		• Any: No ARP/RARP OP flag is specified. (OP is "don't-care".)
		• Request: Frame must have ARP Request or RARP Request OP flag set.
		• Reply: Frame must have ARP Reply or RARP Reply OP flag.
•	Sender IP Filter	Specify the sender IP filter for this ACE.
		• Any: No sender IP filter is specified. (Sender IP filter is "don't-care".)
		• Host: Sender IP filter is set to Host. Specify the sender IP address in the SIP
			Address field that appears.
		• Network: Sender IP filter is set to Network. Specify the sender IP address and
			sender IP mask in the SIP Address and SIP Mask fields that appear.
•	Sender IP Address	When "Host" or "Network" is selected for the sender IP filter, you can enter a
		specific sender IP address in dotted decimal notation.
•	Sender IP Mask	When "Network" is selected for the sender IP filter, you can enter a specific
		sender IP mask in dotted decimal notation.
•	Target IP Filter	Specify the target IP filter for this specific ACE.
		•		: No target IP filter is specified. (Target IP filter is "don't-care".)
			Any
		•			: Target IP filter is set to Host. Specify the target IP address in the Target
			Host
			IP Address field that appears.
		•				: Target IP filter is set to Network. Specify the target IP address and
			Network
			target IP mask in the Target IP Address and Target IP Mask fields that appear.
•	Target IP Address	When "Host" or "Network" is selected for the target IP filter, you can enter a
		specific target IP address in dotted decimal notation.
•	Target IP Mask	When "Network" is selected for the target IP filter, you can enter a specific target
		IP mask in dotted decimal notation.
•	ARP SMAC Match	Specify whether frames can hit the action according to their sender hardware
		address field (SHA) settings.

0: ARP frames where SHA is not equal to the SMAC address.

1: ARP frames where SHA is equal to the SMAC address.

Any: Any value is allowed ("don't-care").

•RARP SMAC Match Specify whether frames can hit the action according to their target hardware

163