Planet Technology WGSW-24040R, SGSW-24040R user manual ACL Add

User’s Manual of WGSW-24040 / WGSW-24040R

SGSW-24040 / SGSW-24040R

<rate_limiter_list>: Rate limiter list (1-15), default: All rate limiters

<packet_rate> : Rate in pps (1, 2, 4, ..., 512, 1k, 2k, 4k, ..., 1024k)

Default Setting:

1

Example:

???

SWITCH/>acl rate 15 1024k

ACL Add

Description:

Add or modify Access Control Entry (ACE).

If the ACE ID parameter <ace_id> is specified and an entry with this ACE ID already exists, the ACE will be modified. Otherwise, a new ACE will be added. If the ACE ID is not specified, the next available ACE ID will be used.

If the next ACE ID parameter <ace_id_next> is specified, the ACE will be placed before this ACE in the list. If the next ACE ID is not specified, the ACE will be placed last in the list.

If the Switch keyword is used, the rule applies to aSyntax:

ACL Add [<ace_id>] [<ace_id_next>] [switch (port <port>) (policy <policy>)] [<sid>] [<vid>] [<tag_prio>] [<dmac_type>]

[(etype [<etype>] [<smac>] [<dmac>]) (arp [<sip>] [<dip>] [<smac>] [<arp_opcode>] [<arp_flags>]) (ip		[<sip>]
[<dip>] [<protocol>] [<ip_flags>]) (icmp [<sip>] [<dip>] [<icmp_type>] [<icmp_code>] [<ip_flags>]) (udp		[<sip>] [<dip>]
[<sport>] [<dport>] [<ip_flags>]) (tcp [<sip>] [<dip>] [<sport>] [<dport>]Parameters:
<ace_id>	: ACE ID (1-1024), default: Next available ID
<ace_id_next> : Next ACE ID (1-1024), default: Add ACE last
switch	: Switch ACE keyword
port	: Port ACE keyword
<port>	: Port number
policy	: Policy ACE keyword
<policy>	: Policy number (1-8)
<sid>	: Switch ID (1-16) or 'any'
<vid>	: VLAN ID (1-4095) or 'any'
<tag_prio>	: VLAN tag priority (0-7) or 'any'
<dmac_type>	: DMAC type: anyunicastmulticastbroadcast
etype	: Ethernet Type keyword
<etype>	: Ethernet Type or 'any'

274