
User’s Manual of
Set the Ports Authenticate Status to “Force Authorized” if the port is connected to the RADIUS server or the port is a uplink port that is connected to another switch. Or once the 802.1X stat to work, the switch might not be able to access the RADIUS server.
4.10.7 802.1X Client Configuration
Windows XP is originally 802.1X support. As to other operating systems (windows 98SE, ME, 2000), an 802.1X client utility is needed. The following procedures show how to configure 802.1X Authentication in Windows XP.
Please note that if you want to change the 802.1x authentication type of a wireless client, i.e. switch to
Configure Sample: EAP-MD5 Authentication
1.Go to Start > Control Panel,
2.
3.Click “Properties” to open up the Properties setting window.
Figure
4.Select “Authentication” tab.
5.Select “Enable network access control using IEEE 802.1X” to enable 802.1x authentication.
6.Select
156