Planet Technology WGSW-24040R, SGSW-24040R user manual AC Power Receptacle, Stack ports, Cascade UP

User’s Manual of WGSW-24040 / WGSW-24040R

SGSW-24040 / SGSW-24040R

SGSW-24040 Rear Panel

Figure 2-7Rear panel of SGSW-24040

SGSW-24040R Rear Panel

Figure 2-8Rear panel of SGSW-24040R

■AC Power Receptacle

For compatibility with electric service in most areas of the world, the Managed Switch’s power supply automatically adjusts to line power in the range 100-240VAC and 50/60 Hz.

Plug the female end of the power cord firmly into the receptalbe on the rear panel of the Managed Switch. Plug the other end of the power cord into an electric service outlet then the power will be ready.

Power Notice:

■Stack ports

The device is a power-required device, it means, it will not work till it is powered. If your networks should active all the time, please consider using UPS (Uninterrupted Power Supply) for your device. It will prevent you from network data loss or network downtime.

In some area, installing a surge suppression device may also help to protect your Managed Switch from being damaged by unregulated surge or current to the Switch or the power adapter.

SGSW-24040 / SGSW-24040R

There are two High-Performance stack ports on the rear panel. One is STX1 / Cascade Down and the other is STX2 /

Cascade UP.

•When stacked, the STX1 / Cascade Down port should connect to the other switch’s STX2 / Cascade UP port and the STX2 / Cascade UP port should connect to other switch’s STX1 / Cascade Down out.

•You can just use attached PLANET CB-STX50 or longer stack cable CB-STX200 connector to stack.

•The CB-STX50 and CB-STX200 are Cross-Overed HDMI cables, only attached PLANET stack cable can be used.

•Plug-and-play connection.

24