|
| User’s Manual of | |
|
| ||
|
|
|
|
|
| • Policy: The ACE will match ingress ports with a specific policy. | |
|
| • Port: The ACE will match a specific ingress port. | |
|
|
|
|
• | Frame Type | Indicates the frame type of the ACE. Possible values are: | |
|
| • Any: The ACE will match any frame type. | |
|
| • EType: The ACE will match Ethernet Type frames. | |
|
| • ARP: The ACE will match ARP/RARP frames. | |
|
| • IPv4: The ACE will match all IPv4 frames. | |
|
| • IPv4/ICMP: The ACE will match IPv4 frames with ICMP protocol. | |
|
| • IPv4/UDP: The ACE will match IPv4 frames with UDP protocol. | |
|
| • IPv4/TCP: The ACE will match IPv4 frames with TCP protocol. | |
|
| • IPv4/Other: The ACE will match IPv4 frames, which are not | |
|
| ICMP/UDP/TCP. | |
|
|
|
|
• | Action | Indicates the forwarding action of the ACE. | |
|
| • Permit: Frames matching the ACE may be forwarded and learned. | |
|
| • Deny: Frames matching the ACE are dropped. | |
|
|
|
|
• | Rate Limiter | Indicates the rate limiter number of the ACE. The allowed range is 1 to 15. When | |
|
| Disabled is displayed, the rate limiter operation is disabled. | |
|
|
|
|
• | Port Copy | Indicates the port copy operation of the ACE. Frames matching the ACE are | |
|
| copied to the port number. The allowed values are Disabled or a specific port | |
|
| number. When Disabled is displayed, the port copy operation is disabled. | |
|
|
|
|
• | Logging | Indicates the logging operation of the ACE. Possible values are: | |
|
| • Enabled: Frames matching the ACE are stored in the System Log. | |
|
| • Disabled: Frames matching the ACE are not logged. | |
|
| Please note that the System Log memory size and logging rate is limited. | |
|
|
|
|
• | Shutdown | Indicates the port shut down operation of the ACE. Possible values are: | |
|
| • Enabled: If a frame matches the ACE, the ingress port will be disabled. | |
|
| • Disabled: Port shut down is disabled for the ACE. | |
|
|
|
|
• | Counter | The counter indicates the number of times the ACE was hit by a frame. | |
•Modification Buttons You can modify each ACE (Access Control Entry) in the table using the following buttons:
:Inserts a new ACE before the current row.
:Edits the ACE row.
:Moves the ACE up the list.
:Moves the ACE down the list.
:Deletes the ACE.
:The lowest plus sign adds a new entry at the bottom of the ACE listings.
160
