![](/images/new-backgrounds/1117458/117458131x1.webp)
User’s Manual of
The SNMP System Configuration screen in Figure
Figure 4-3-1 SNMP System Configuration page screenshot
|
|
|
Object | Description | |
• | Mode | Indicates the SNMP mode operation. Possible modes are: |
|
| • Enabled: Enable SNMP mode operation. |
|
| • Disabled: Disable SNMP mode operation. |
|
|
|
• | Version | Indicates the SNMP supported version. Possible versions are: |
|
| • SNMP v1: Set SNMP supported version 1. |
|
| • SNMP v2c: Set SNMP supported version 2c. |
|
| • SNMP v3: Set SNMP supported version 3. |
|
|
|
• | Read Community | Indicates the community read access string to permit access to SNMP agent. |
|
| The allowed string length is 0 to 255, and the allowed content is the ASCII |
|
| characters from 33 to 126. The field only suits to SNMPv1 and SNMPv2c. |
|
| SNMPv3 is using USM for authentication and privacy and the community string |
|
| will associated with SNMPv3 communities table. |
|
|
|
• | Write Community | Indicates the community write access string to permit access to SNMP agent. |
|
| The allowed string length is 0 to 255, and the allowed content is the ASCII |
|
| characters from 33 to 126. The field only suits to SNMPv1 and SNMPv2c. |
|
| SNMPv3 is using USM for authentication and privacy and the community string |
|
| will associated with SNMPv3 communities table. |
|
|
|
• | Engine ID | Indicates the SNMPv3 engine ID. The string must contain an even number |
|
| between 10 and 64 hexadecimal digits, but |
|
| Change of the Engine ID will clear all original local users. |
|
|
|
|
|
|
66