Planet Technology WGSW-24040R, SGSW-24040R Reset button, About 1~3 second, Stack ID, Master LED

User’s Manual of WGSW-24040 / WGSW-24040R

SGSW-24040 / SGSW-24040R

■Reset button

At the left of front panel, the reset button is designed for reboot the Managed Switch without turn off and on the power. The following is the summary table of Reset button functions:

Reset Button Pressed and Released	Function
About 1~3 second	Reboot the Managed Switch
	Reset the Managed Switch to Factory Default configuration.
	The Managed Switch will then reboot and load the default
Until the PWR LED lit off	settings as below:
	。	Default Password: admin
	。	Default IP address: 192.168.0.100
	。	Subnet mask: 255.255.255.0
	。	Default Gateway: 192.168.0.254

■ Stack ID

SGSW-24040 and SGSW-24040R only

Each SGSW Managed Stackable Switch on a stack must have a unique “Stack ID”. There are 16 degrees (0~9, A~F) in the rotary switch. The Stack ID is configured via Web or CLI management interface. Use the Stack ID to identify the localtion of the real device.

Stack ID is not equals to the Master Priority that configured in the management interface.

■Master LED

SGSW-24040 and SGSW-24040R only

If master switch is fail or disconnected to the switch by stack port, the switch with least switch ID will become master.

20