Manuals / Planet Technology / Computer Equipment / Switch

Planet Technology SGSW-24040R, WGSW-24040R user manual „ Last Supplicant/Client Info, MAC-based

Models: SGSW-24040R WGSW-24040R

1 308

Download 308 pages 62.4 Kb

Page 153

User’s Manual of WGSW-24040 / WGSW-24040R

SGSW-24040 / SGSW-24040R

MAC-based:

Counts all the RADIUS packets sent from the switch towards the RADIUS server for a given port (left-most table) or client (right-most table). Possible retransmissions are not counted.

Last Supplicant/Client Info

For MAC-based ports, this section is embedded in the RADIUS counter's section.

Information about the last supplicant/client that attempted to authenticate.

Last Supplicant/Client Info

	Name	IEEE Name	Description
			Port-based:
		dot1xAuthLastEapolFrame	The protocol version number carried in the most recently received
	Version	dot1xAuthLastEapolFrame	EAPOL frame.
		Version	MAC-based:
			MAC-based:
			Not applicable.

			Port-based:
		dot1xAuthLastEapolFrame	The source MAC address carried in the most recently received
	Source	dot1xAuthLastEapolFrame	EAPOL frame.
		Source	MAC-based:
			MAC-based:
			Not applicable.

			Port-based:
			The user name (supplicant identity) carried in the most recently
	Identity		received Resp/ID EAPOL frame.
	Identity	-	MAC-based:
	or (Last) Client	-	MAC-based:
	or (Last) Client		The MAC address of the last client that attempted to authenticate

			(left-most table), or the MAC address of the currently selected
			client (right-most table).

Clients attached to this port

This table is only available for MAC-based ports

Each row in the table represents a MAC-based client on the port, and there are three parameters for each client:

•MAC Address: Shows the MAC address of the client, which is also used as the password in theauthentication process against the RADIUS server. Clicking the link causes the client's RADIUS counters to be shown in the right-most RADIUS counters table above. If no clients are attached, it shows No clients attached.

•State: Shows whether the client is authorized or unauthorized. As long as the RADIUS server hasn't successfully authenticated a client, it is unauthorized.

Last Authentication: Show the date and time of the last authentication of the client. This gets updated for every re-authentication of the client.

153

Image 153

Planet Technology SGSW-24040R, WGSW-24040R user manual „ Last Supplicant/Client Info, MAC-based

Contents

User’s Manual Disclaimer TrademarksFCC Warning CE Mark Warning Weee WarningTable of Conetnts 5.1 118 105132 140181 159185 187212 208229 237244 251 257265 277 272282 287293 290295 297Product Description Packet ContentsHigh Performance How to Use This Manual High-performance 5GbE Stacking interface ¾ Layer 2 Features Product Features¾ Physical Port 24-Port 10/100/1000Base-T Gigabit Ethernet RJ-45¾ Security ¾ Multicast¾ Management ¾ StackingHardware Specification Product SpecificationTraffic classification based, Strict priority and WRR Hardware Description Switch Front PanelGigabit TP interface Gigabit SFP slotsAbout 1~3 second Reset buttonStack ID Master LEDLED Indications 1000Base-SX/LX SFP interfaces Shared Port-21~Port-24 Speed 1000MbpsOff To indicate that the SFP port is link down 5Rear panel of WGSW-24040 Switch Rear PanelAC Power Receptacle Stack portsCascade UP 9SGSW-24040 / SGSW-24040R Stack Ports DC Power ConnectorDesktop Installation Install the SwitchRack Mounting Supply power to the Managed Switch13Plug-in the SFP transceiver Installing the SFP transceiver„ Approved Planet SFP Transceivers „ Connect the fiber cable„ Remove the transceiver module Page Power switch in the OFF position and the DC power is OFF Connecting DC Power Supply WGSW-24040R / SGSW-24040RSGSW-24040 / SGSW-24040R Stack InstallationManagement Stacking Connecting Stacking cableStack ID Master LED 21Separated Stack connection This chapter covers the following topics RequirementsManagement Access Overview Administration ConsoleMethod Advantages Disadvantages „ 115200 bps „ 8 data bits „ No parity „ 1 stop bit Direct AccessWeb Management 4Web main screen of Managed SwitchSNMP-Based Network Management ProtocolsVirtual Terminal Protocols Management Architecture Snmp ProtocolAbout Web-based Management WEB ConfigurationHttp//192.168.0.100 „ Logging on the switchPage Panel Display Main WEBState RJ-45 Ports SFP Ports Stack PortsMain Menu 5WGSW/SGSW Managed Switch Main Funcrions MenuSystem IP ConfigurationSystem Information Page IP Configuration Old Password User AuthenticationNew Password PasswordSntp Configuration Click System Web Firmware Upgrade WEB Firmware UpgradeUpgrade button Tftp Firmware UpgradeClick System -TFTP Firmware Upgrade Tftp Server IP8TFTP Firmware upgrade pop-up message „ Configuration Download Configuration Save„ Configuration Upload Configuration UploadPage Factory Default System Reboot 18Set Start-up screenshot „ Example 1 Save Current Configuration setting19Download system software screenshot „ Example 2 Downloading System Software from a Server„ Example 3 Downloading Configuration Settings from a Server „ Example 4 Saving or Restoring Configuration Settings Simple Network Management Protocol Snmp System ConfigurationSnmp Overview Snmp OperationsVersion ModeRead Community Write CommunitySnmp Trap Configuration Snmp System Information ConfigurationSystem Contact System NameTrap Version Trap ModeTrap Community Trap DestinationSNMPv3 Accesses Configuration SNMPv3 ConfigurationDelete Group NameSecurity Model SNMPv3 Communities ConfigurationSecurity Level Read View NameSecurity Name SNMPv3 Groups ConfigurationAuthentication SNMPv3 Users ConfigurationUser Name ProtocolPrivacy Password SNMPv3 Views ConfigurationPrivacy Protocol View Name„ Example Add a new SNMPv3 user View TypeOID Subtree 9SNMPv3 Users-NEW page screenshot „ Example Add a new SNMPv3 Group11SNMPv3 Groups-NEW page screenshot Port Management Port ConfigurationPort Power ControlLink Flow Control2Port Statistics Overview page screenshot Port Statistics OverviewDetailed Port Statistics Receive Total and Transmit Total Receive Error CountersReceive and Transmit Size Counters Receive and Transmit Queue CountersPort Mirroring Configuration Transmit Error CountersTx Drops Port to mirror to Mirror Port Configuration6Port Mirror Configuration page screenshot „ Sgsw Stackable Switch1Link Aggregation Link AggregationPage Static Aggregation Group Configuration Static Aggregation ConfigurationHash Code Contributors Destination MACLocality Group IDPort Members Lacp Enabled Lacp ConfigurationKey RoleLacp Port Status Lacp System StatusPartner Port LacpLacp Transmitted Lacp statisticsLacp Received DiscardedVlan Overview VlanIeee 802.1Q Standard Ieee 802.1Q Vlan802.1Q Vlan Tags Port Vlan ID Vlan Classification Vlan Basic Information ObjectDescription Vlan ModeSupported VLANs VLANs Vlan LearningUnderstand nomenclature of the Switch Vlan Port ConfigurationPvid This is the logical port number for this rowLink Type In-Q ModeEther type Port Vlan IDVlan Membership Configuration „ Adding Static Members to VLANs Vlan IndexVlan ID Overview Private Vlan Configuration„ Promiscuous ports „ Isolated portsPvlan Port Type IsolatedPromiscuous Bridge Protocol Data Units Rapid Spanning Tree ProtocolCreating a Stable STP Topology STP Port StatesPort transitions from one state to another as follows Except by setting priority ConfigurableSTP Parameters STP Operation Levels BelowForward Delay Timer Maximum Age TimerVariable Description Default Value Port Priority Default Spanning-Tree Configuration Feature Default ValueIllustration of STP 110 Forward Delay Rstp System ConfigurationSystem Priority Max AgeRstp Bridge Status Rstp Port Configuration Rstp EnabledPath Cost Priority EdgePoint2Point Port Type Link Type Ieee 802.1w-2001 Ethernet Rstp Port Status Rstp Rstp Port StatisticsSTP TCNQuality of Service Understand QOSQoS Terminology QCL # QoS Control List ConfigurationQCE Type Frame.The following QCE types are supportedQoS Control Entry Configuration Type ValueTraffic Class Port QoS Configuration Queuing Mode Default ClassQueue Weighted User PriorityQCL Configuration Wizard Set up Policy RulesApplication Rules QCL ID Includes the folling fileds Object DescriptionFrames that hit this QCE are set to match this specific QCL Port in a QCL member, click the radio buttonSet up Typical Network Application Rules Audio and VideoGames User Definition ButtonsSelect the QCL ID to which these QCEs apply Set up ToS Precedence Mapping Set up Vlan Tag Priority Mapping QoS Statistics Bandwidth Control Frame Type Storm Control ConfigurationStatus RateMulticast Igmp SnoopingAbout the Internet Group Management Protocol Igmp Snooping 133 Igmp Versions 1 0x170x12 „ Igmp Querier Idle MemberFlooding enabled Igmp Snooping ConfigurationEnabled Igmp Querier Igmp SnoopingIgmp Port Related Configuration Router PortFast Leave Igmp Snooping Status Object DescriptionVlan ID of the entry Multicast Address Table Ieee 802.1X Network Access Control Overview of 802.1X Port-Based AuthenticationOverview of MAC-Based Authentication „ Device Roles Understanding Ieee 802.1X Port-Based Authentication„ Authentication Initiation and Message Exchange „ Ports in Authorized and Unauthorized States 10-2EAP message exchange10.2 802.1X System Configuration Radius IPRadius Secret Enabled ReauthenticationEAP Timeout Period10.3 802.1X and MAC-Based Authentication Port Configuration Max Clients Port StateRestart State 10.4 802.1X Port StatusLast Source Last ID10-6802.1X Statistics Port 1 page screenshot 10.5 802.1X and MAC-Based Authentication StatisticsDirection Name Ieee Name Description Eapol CountersDescription Port-based Radius Counters Direction Name Ieee NameMAC-based Port- and MAC-basedMAC-based „ Last Supplicant/Client InfoWindows Platform Radius Server Configuration 155 „ Configure Sample EAP-MD5 Authentication 10.7 802.1X Client Configuration157 158 Access Control Lists Access Control List ConfigurationIngress Port Rate Limiter ActionPort Copy LoggingSwitch ACE Configuration„ Vlan Parameters „ MAC ParametersSmac Filter Dmac FilterARP/ Rarp „ ARP ParametersIP/Ethernet Length „ IP ParametersEthernet IP Protocol FilterIP TTL „ TCP/UDP Parameters „ Icmp ParametersTCP SYN TCP FINTCP PSH TCP ACKACL Configuration wizard „ Ethernet Type ParametersEtherType Filter 11-3Set up Policy Rules page screenshot Policy 5 for guest ports Internet access onlyPolicy ID Set up Port PoliciesInstant Messaging Common ServersMSN Messenger Google Talk Yahoo Messenger Ethernet TypeNetBIOS Ping Request Ping Reply OthersSnmp Traps 173 Set up Source MAC and Source IP Binding Binding EnabledSource IP Address UDP DoS Fraggle Set up DoS Attack Detection RulesIcmp DoS Smurf DeathPort n Switch nPolicy n DenyRate Limiter ID ACL Rate Limiter Configuration16K 32K 64K 128K 512KACL Ports Configuration 180 Aging Configuration MAC Address Table ConfigurationRange 10-10000000 seconds Default 300 seconds Address TableStatic MAC Table Configuration Dynamic MAC Table MAC Address Table StatusNavigating the MAC Table MAC Table Columns184 MAC Table Learning DisableAuto Secure186 Link Layer Discovery Protocol LldpLldp Configuration „ Lldp ParametersTx Interval Tx Delay „ 4.14.2.2 Lldp Port ConfigurationTx Hold Tx ReinitSys Name Port DescrSys Descr Sys CapaLldp Neighbor „ Global Counters Lldp StatisticsLocal Counters Cable Diagnostics Network DiagnasticsCable Status Ping Destination IP AddressPing Size „ Ring topology „ Chain topology same as a disconnected ring Stacking SGSW-24040 / SGSW-24040R197 „ Assigning and Swapping Switch IDs Switch IDs„ Removing a Switch From the Stack „ Replacing a Switch„ General Switch ID Assignment Rules Master ElectionStack Redundancy Utilize all stack links in the ring Shortest Path ForwardingStack Configuration Stack Information Master Switch„ Stack Topology „ Stack List„ Master Forwarding Table 16-10Port State Overview page screenshot Stack Port State OvewviewStack Example „ Identify the Master Switch206 207 Logon to the Console Accessing the CLI„ Configure IP address Configure IP addressSubnet Mask Gateway Switch/ ip setup 192.168.1.100 255.255.255.0Telnet login Command Groups System CommandSystem Configuration SyntaxSystem Reboot System Restore DefaultExample Default Setting System NameSystem Prompt System Sntp System PasswordSystem Firmware Load System Timezone217 IP Configuration SyntaxParameters IP Ping IP Setup220 Port Management Command Port ConfigurationPort State Port Flow Control Port ModePort Maximum Frame Port Excessive Port PowerPort VeriPHY Port StatisticsPort Numbers Mirror Configuration Mirror PortMirror SID Mirror Mode Aggregation Configuration Link Aggregation CommandAggregation Add Parameters portlist Port listAggregation Lookup Aggregation DeleteAggregation Mode Lacp Configuration Lacp Key Lacp ModeLacp Status Lacp RoleLacp Statistics 236 Vlan Configuration Command Vlan ConfigurationVlan Mode Vlan Frame Type AllTagged Allow tagged frames only Vlan Link Type Vlan Ingress FilterVlan Q-in-Q Mode Vlan Ethernet TypeMan Set out layer Vlan tag ether type MAN Vlan Delete Vlan AddVlan Lookup Pvlan Isolate Pvlan ConfigurationSpanning Tree Protocol Command Rstp ConfigurationRstp SysPrio Rstp Age Rstp DelayRstp Mode Normal Rstp Default SettingRstp Version Rstp Priority Rstp CostRstp P2P Rstp EdgeRstp Status Rstp mCheck Rstp StatisticsMulticast Configuration Command Igmp ConfigurationIgmp Mode Igmp State Igmp Fast Leave Igmp QuerierIgmp Router Igmp Flooding Igmp GroupsIgmp Status 256 QoS Configuration Quality of Service CommandQoS Default QoS ClassesQoS QCL Port QoS Tag PriorityQoS QCL Add Qclid QCL ID Default SettingParameters Qclid QceidQoS QCL Lookup QoS QCL DeleteQoS Mode QoS WeightQoS Rate Limiter QoS Shaper QoS Multicast QoS UnicastQoS Broadcast 802.1x Port Access Control Command Dot1x ConfigurationDotx1 Mode Dot1x Server Dot1x StatusDot1x Secret Dot1x AuthenticateDot1x Period Dot1x Re-authenticationDot1x Statistics Dot1x TimeoutDot1x Clients Dot1x AgetimeParameters Portlist Dot1x Holdtime Access Control List Command ACL ConfigurationACL Action ACL Rate ACL PolicyACL Add ACL Delete ACL Lookup MAC Address Table Command MAC ConfigurationMac Add MAC Lookup MAC DeleteMAC Learning MAC Age TimeMAC Statistics MAC DumpMAC Flash Lldp Command Lldp ConfigurationLldp Mode Lldp Interval Lldp Optional TLVLldp Hold Lldp DelayLldp Information Lldp ReinitLldp Statistics Stack Management Command Stack ListStack Master Reelect Stack Select Stack SID SwapStack SID Delect Stack SID Asign Learning Forwarding & FilteringStore-and-Forward If attached device is 100Base-TX port will set to Auto-Negotiation292 Performance is bad Solution Link LED is not lit SolutionWhy the Switch doesnt connect to the network Solution Switch does not power up Solution„ While IP Address be changed or forgotten admin password Stacking not functioning SolutionSwitchs RJ-45 Pin Assignments RJ-45 Connector pin assignment Contact10/100Mbps, 10/100Base-TX Straight Cable = Brown Straight Cable= Brown ACL ACEAggregation ARPDhcp DESDNS DoSEthernet Type DscpFTP HttpIeee IcmpIgmp ImapIpmc LldpMAC Table MD5 NetBIOSMirroring NFSPolicer PingPOP3 Private VlanQoS QCLRarp SambaSmtp SHASnmp SntpTelnet TCPTftp ToSUDP 308