![](/images/new-backgrounds/1117458/117458441x1.webp)
User’s Manual of
6.2 Port Management Command
Port Configuration
Description:
Show port configuration.
Syntax:
Port Configuration [<port_list>]
Parameters:
<port_list>: Port list or 'all', default: All ports
Example:
Display port1~4 status
SWITCH/>port configuration |
|
|
|
| |||
Port | State | Mode | Flow Control | MaxFrame | Power | Excessive | Link |
1 | Enabled | Auto | Disabled | 9600 | Enabled | Discard | Down |
2 | Enabled | Auto | Disabled | 9600 | Enabled | Discard | Down |
3 | Enabled | Auto | Disabled | 9600 | Enabled | Discard | Down |
4 | Enabled | Auto | Disabled | 9600 | Enabled | Discard | 100fdx |
|
|
|
|
|
|
|
|
Port State
Description:
Set or show the port administrative state.
Syntax:
Port State [<port_list>] [enabledisable]
Parameters:
<port_list>: Port list or 'all', default: All ports
enable : Enable port
disable : Disable port
(default: Show administrative mode)
221