SAGEM 3P@C
You must configure the terminal correctly.
prompt
Step 2: Start the equipment and enter the main menu of the Bootrom
Power on the equipment, and press <Space> repeatedly. If the “3P@C” prompt appears, it indicates that you have accessed the Bootrom menu. The information of the menu is shown as follows:
3P@C 4450E Boot Loader V2.21
Compiled: Jan 3 2004 13:21:04 SDRAM test....passed.
Base ethernet MAC address: 00:05:3b:48:47:fd
?- List all available commands
h | - List all available commands |
g | - Boot an executable image |
dl | - Enter download mode to load new image or config file |
r | - Reboot system |
Press 'h' or '?' To get helping information. 3P@C:
For menu options and their meanings, see Figure
| You can upgrade the 3P@COS software in the Xmodem |
| mode. Alternatively, you can download new host program in |
prompt | the FTP mode and save the program to Flash. |
Step 3: Enter the download submenu
Select the No. dl option to enter the download mode as follows: you enter download mode
? | - List all available commands |
h | - List all available commands |
n | - Exchange load mode(default FTP) |
p | - Print boot parameters |
c | - Change boot parameters |
3P@C Installation Manual
Page