SAGEM 3P@C

„DS Out Power(dB): Output power in the downstream direction. If the attenuation in the downstream direction is extremely large, the ATU-C will improve the output power in the downstream direction moderately to improve the signal-to-noise ratio, thus ensuring the link transmission quality in the downstream direction.

„US Out Power(dB): Output power in the upstream direction. If the attenuation in the upstream direction is extremely large, the ATU-R will improve the output power in the upstream direction moderately to improve the signal-to-noise ratio in the upstream direction, thus ensuring the link transmission quality in the upstream direction.

„DS Attainable Rate(Kbps): The estimated attainable link rate in THE downstream direction by the ATU-C according to the current link parameters.

„US Attainable Rate(Kbps): The estimated attainable link rate in upstream direction by the ATU-C according to the current link parameters.

For the Show port [portlistallactive] adsl line-configcommand, whether the port in the up or down state, the system will display port configuration information: Upstream/downstream rate, working mode, channel mode, interleaved depth, and upstream/downstream target noise margin. For example:

3P@C(config)# show port 15:2 adsl line-config

-----------------------------------------------------------------------

 

Port:<15:2> 's Configuration Information

 

Service Mode

 

:MultiMode Channel Mode

 

:Interleaved

DS MinRate(Kbps)

 

:32

US MinRate(Kbps)

:32

DS MaxRate(Kbps)

 

:8160

US MaxRate(Kbps)

:1024

DS Interleaved Delay(ms)

:32

US Interleaved Delay(ms)

:16

DS TargetNoiseMargin(dB)

:6

US TargetNoiseMargin(dB)

:6

DS MaxNoiseMargin(dB)

:12

US MinNoiseMargin(dB)

:0

ATUC LossOfFrame

 

:0

ATUC LossOfSignal

:0

ATUC LossOfLink

:0

ATUC LossOfPower

:0

 

ATUC Errored

:0

 

 

 

 

-----------------------------------------------------------------------

The parameters are described as follows:

„Service Mode: Working mode of the port. It can be multimode, g.dmt, g.lite, or t1.413. If it is configured as multimode, it indicates that the central office end and modem end can determine the actual working mode as g.dmt, g.lite, or t1.413 through negotiation.

„Channel Mode: Channel mode of the port. Its current value must be consistent with its configured value.

„DS MinRate(Kbps): The minimum rate in the downstream direction. It ranges within 1 – 8,160 kbps. It must be less than the maximum rate in the downstream direction (32 kbps).

„US MinRate(Kbps): The minimum rate in the upstream direction. It ranges within 1 – 1,024 kbps. It must be less than the maximum rate in the upstream direction.

„DS MinRate(Kbps): The maximum rate in the downstream direction. It ranges within 1 – 8,160 kbps. It must be greater than the minimum rate in the downstream direction.

„US MinRate(Kbps): The maximum rate in the upstream direction. It ranges within 1 – 1,024 kbps. It must be greater than the minimum rate in the upstream direction.

„DS Interleaved Delay(ms): The interleaved depth in the downstream direction. The actual interleaved depth in the downstream direction must be not greater than the configured value.

„US Interleaved Delay(ms): The interleaved depth in the upstream direction. The actual interleaved depth in the upstream direction must be not greater than the configured value.

„DS TargetNoiseMargin(dB): The target noise margin in the downstream direction. The actual noise margin in the downstream direction must be greater than this value.

3P@C Installation Manual

Page 8-4 Reproduction and communication in any form prohibited without the written permission of SAGEM SA