SAGEM 3P@C

Figure 7-2 hoosing the file to be sent

Figure 7-3 File transfer interface

Step 6: Return to the main menu

After the file is transferred successfully, the above interface disappears. The system returns to the serial port menu (set the rate to 9,600 bps). Execute the command x to return to the Bootrom main menu.

1.1.1.52Upload/download the system file through FTP

3P@C 4450E can upload and download the system software through FTP.

The upload/download operation is implemented for the client. The download operation is to obtain the file of the server side. The upload operation is to transfer the file of the client to the server side.

3P@C 4450E can sever as the server side or the client of the FTP.

„If 3P@C 4450E serves as the server, you can transfer the system file to the equipment through the command upload ftp [config-file] <A.B.C.D> <username> <password> <filename> in the client PC (containing the system file).

„If 3P@C 4450E serves as the client, you can download the system file in the remote server PC to the local equipment through the command download ftp [3P@COSconfig- filexducodevduos] <A.B.C.D> <username> <password> <filename> in the 3P@C 4450E equipment.

3P@C Installation Manual

Page 7-8 Reproduction and communication in any form prohibited without the written permission of SAGEM SA