SAGEM 3P@C
Rt vdsl auto neg: Setting of remote vdsl
Rt ethernet speed: Remote Ethernet speed (10 M/100 M)
Rt ethernet duplex: Remote Ethernet duplex mode (full/half).
Rt ethernet flowctrl: Remote Ethernet flow control. “on” indicates that the function is enabled, and “off” indicates that the function is disabled.
For the show port [portlistallactive] vdsl
3P@C(config)# show port 14:19 vdsl
Port:<14:19> 's Config Information |
| ||
DS line rate(Mbps) | : 16.67 | US line rate(Mbps) | : 12.5 |
Rt vdsl auto neg | : On | Rt ethernet speed | : 100 M |
Rt ethernet duplex | : Full | Rt ethernet flowctrl | : On |
The parameters are described as follows:
DS line rate(Mbps): Downstream line rate (Mbps). It can be 1.04, 1.56, 2.08, 4.17, 8.33, 10.04, 12.5, or 16.67.
US line rate(Mbps): Upstream line rate (Mbps). It can be 1.04, 1.56, 2.08, 4.17, 8.33, 10.04, 12.5, or 16.67.
Rt vdsl auto neg: Setting of remote vdsl
Rt ethernet speed: Remote Ethernet speed (10 M/100 M)
Rt ethernet duplex: Remote Ethernet duplex mode (full/half).
Rt ethernet flowctrl: Remote Ethernet flow control. “on” indicates that the function is enabled, and “off” indicates that the function is disabled.
3P@C Installation Manual
Page