Sagem 4450E 6.3.3.Online Help of Command Line

SAGEM 3P@C

Command	Function
quit	Quits the command line and disconnects (this
	command has the same function as logout)
show history	Shows the history commands that have been
	input
show services	Shows the services provided by the current
	system
show version [all <0-15>]	Shows the version information of cards
terminal length <value>	Sets the number of lines output per screen of the
	terminal
who	Shows the users connected to the switch
	currently
who am i	Shows the information of the current user
show idle-timeout	Shows the idle timeout time
show time	Shows the current time of the system

All commands except enable in the read-only mode are also effective in the configuration mode, so they are omitted in Table 6-3.

Table 6-3 Common commands in the configuration mode

Command		Function
enable-password		Modifies your own password to enter the
		configuration mode
config time <1970-2069>		Configures the system time
<1-12>	<1-31>
<HH:MM:SS>
erase {startup-config}*1		Erases the system start-up configuration saved in
		the switch
hostname <hostname>		Renames the switch, for example, the default
		name of this switch is 3P@C
idle-timeout <value>		Sets the idle waiting time of 3P@C 4450E before
		the system automatically enters the state before
		login
show running-config		Shows the running configuration of the system
show startup-config		Shows the startup configuration of the system
save {configuration}*1		Writes and saves the running configuration in the
		switch

6.3.3.Online Help of Command Line

3P@C 4450E provides abundant online help information to help users input the commands.

„You can enter <help> in any command mode to get a brief description of the help system.

„There is built-in syntax help in the command line interface.If you are not sure of the syntax of a certain command, you may input the known former part of the command and key in “?”. Then the command line prompts you the meaning or function of the command. If you input a space and “?” after the command, the command line will prompt the possible commands after the part of command you input. Then you may continue to input the command as prompted till the

following appears:

<cr> Just Press Enter to Execute command!

It shows that the complete command has been input. Press Enter to execute it.

3P@C Installation Manual

Page 6-5 Reproduction and communication in any form prohibited without the written permission of SAGEM SA