SAGEM 3P@C

1.1.1.51Upgrade through BOOTROM

During code start, you can download the system software to the hard disc or mobile storage equipment.

During the power-on, the BOOTROM menu prompts you to upgrade the system software in two ways: Upgrade through network ports, and upgrade through the Console port. Normally, you are suggested to upgrade the system file through the network port. It is because the system software is large, while the download speed through the Console port is very low.

1.1.1.51.1Upgrade the system software through the network port

Step 1: Set the FTP server remotely

In this mode, you need to establish an FTP server in the terminal storing the program file, connect the equipment to be upgraded with the FTP server through the specified port, and establish a user name and password in the FTP server.

 

 

SAGEM sa does not provide the FTP software, so users need to

 

 

prepare or purchase such software. The 3CDaemon software of

 

 

3COM is recommended.

 

prompt

 

 

 

 

 

Step 2: Enter the main menu of the Bootrom

During equipment start, press and hold <Space> to enter the main menu of the Bootrom as follows:

3P@C 4450E Boot Loader V2.21 Compiled: Jan 3 2004 13:21:04 SDRAM test....passed.

Base ethernet MAC address: 00:05:3b:48:47:fd

?- List all available commands

h

- List all available commands

g

- Boot an executable image

dl

- Enter download mode to load new image or config file

r

- Reboot system

Press 'h' or '?' To get helping information. 3P@C:

3P@C Installation Manual

Page 7-2 Reproduction and communication in any form prohibited without the written permission of SAGEM SA