Sagem 4450E manual 7

				SAGEM 3P@C
	4.4.3.		Installing the SMUB	4-27
	4.4.4. Connecting the Ethernet Interfaces of SMUB			4-28
	4.4.5. Connecting the Optical Interfaces of SMUB			4-30
4.5. INSTALLING THE SUBSCRIBER SERVICE CARDS				4-31
4.6. INSTALLING THE DUMMY PANELS				4-31
4.7. CONNECTING THE SUBSCRIBER CABLES				4-32
4.8. CONNECTING THE CONSOLE CABLE				4-37
5. Suggestions to Ethernet Cabling				5-1
5.1. REQUIREMENTS FOR CABLE TYPES				5-1
5.2. REQUIREMENTS FOR CABLING LENGTH				5-1
5.3. SPACING REQUIREMENTS FOR INDOOR CABLING				5-1
5.4. SEVERAL FORBIDDEN OVERHEAD CABLING METHODS				5-3
5.5. OTHER REQUIREMENTS FOR OUTDOOR CABLING				5-4
5.6. INSTALLING EXTERNAL LIGHTNING ARRESTER				5-4
6.	System Configuration and Management			6-1
6.1.		EQUIPMENT POWER-ON		6-1
6.2. SETTING UP THE CONFIGURATION ENVIRONMENT				6-1
	6.2.1. Local Configuration via the Console Interface			6-1
	6.2.2. Remote Configuration via Telnet			6-3
6.3.		COMMAND LINE SYSTEM		6-4
	6.3.1.		Command Mode	6-4
	6.3.2.		Common Commands	6-4
	6.3.3. Online Help of Command Line			6-5
	6.3.4. Command Line Edit Feature			6-6
6.4.		SYSTEM MANAGEMENT		6-6
	6.4.1. Storage Media and File Type			6-6
	6.4.2.		Program File Management	6-7
	6.4.3.		Configuration File Management	6-7
Part	II			8
7.	System Maintenance			7-1
7.1.		SYSTEM UPGRADE		7-1
	7.1.1. Storage Media and File Type			7-1
	7.1.2. Sequence of System Upgrade			7-1
	7.1.3. Upgrading the System File			7-1
	7.1.4. Upgrading the Master System Control Board			7-10
	7.1.5. Upgrading the Standby System Control Board			7-12
7.2. MANAGING THE CONFIGURATION FILE				7-12
	7.2.1. Type and Format of Configuration File			7-12

3P@C Installation Manual

Page 0-6Reproduction and communication in any form prohibited without the written permission of SAGEM SA