SAGEM 3P@C

1.1.1.32Storage environment requirements

„Temperature: 10°C ~ 30°C.

„Humidity: 30% ~ 70%.

„There should be basically vibration-free, low dust concentration and free of strong electromagnetic interference with good antistatic measures taken and wide site space.

 

Preferably you should unpack inside or near the equipment

 

room to avoid hard moving of the equipment or damaged to

prompt

the equipment.

3.5.2.Unpacking

1.1.1.33Packing box of the general chassis

The assembly wooden box is used as the packing box of 3P@C 4450E. It is connected and fixed with plastic clips. Figure 3-2 shows its outside view.

Figure 3-2 Appearance of the packing box

Inside the packing box, there are packing materials such as foam pad, antistatic plastic bag and desiccants. The equipment is placed in the antistatic plastic bag. Its upper edge, bottom edge and all the corners are protected with the foam pads, and the foam pads are connected and fixed with paper boards, as shown in Figure 3-3:

3P@C Installation Manual

Page 3-10 Reproduction and communication in any form prohibited without the written permission of SAGEM SA