SAGEM 3P@C
2.1.3.Fan Module
In the lower part of the 10U chassis is a 1U fan module, as shown in the following figure:
Figure
Alarm LED
Screw | Hidden puller adapter |
Viewed from the front, the fan module consists of the following parts:
Screw: Used to fix the fan module.
Alarm indicator: Used for giving out failure alarm of the fan module
Hidden puller adapter: Usually closed. When removing the fan module, it can be used to pull out the fan module. For the specific operations, refer to the related contents in Section 4.2.2.
Each fan module provides 6 radiator fans, as shown in Figure
Figure
2.1.4.Air Deflector Frame
Below the fan module is a 2U air deflector frame with the front inlet and rear outlet design and isolated in the middle by a spacer. The sectional view of the air deflector frame is shown in the following figure:
Figure
|
| Spacer |
|
|
|
|
| When the switch is operating, the cold air is drawn in above |
|
| the spacer. If multiple switches are operating at the same |
|
| time, the hot air coming out from the lower switch are |
| prompt | exhausted below the spacer via the rear of the air deflector |
|
| frame. |
3P@C Installation Manual
Page