SAGEM 3P@C

Tagged Ports :

Untagged Ports : 0:1 0:2 0:4

7.3.5.Viewing FIB Table

Operation Guide

Execute the command show fdb {[mac] <macaddr>}*1 {[vlan] [<name><1-4095>]}*1

{[agingtime]}*1 {[permanent]}*1 {[port][ <portlist>]}*1 {[slot][<0-15>]}*1 to view the FDB table. The table contains the information including: User MAC address, whether the MAC address of the opposite router is learned or not, whether the port and Vlan Name are correct or not, and fdb aging time.

Reference index

The information of the FDB address table is showed as follows: 3P@C(config)# show fdb

----- Begin of Mac Address Table Information (all)-----

Total 1 mac address entry showed.

Mac address

Port Vlan name

Flags

------------------------------------------------------

00:04:93:40:47:06 <3:23> default

Age

------------------ ---- -----------------------------

 

-------- End of Mac Address Table Information -------

The FDB entries to the CPU are not displayed.

prompt

7.3.6.Viewing the ARP Table

Operation Guide

You can execute the command show arp {[<A.B.C.D>permanent]}*1 to see whether the ARP has learned the MAC address of the corresponding IP.

Reference index

 

For example:

 

3P@C(config)# show arp

 

Begin to show arp table information

 

Physics Address Ip Address

Type

Total 1 information (include dynamic and permanent)

00:01:02:28:49:06 20.1.1.2

dynamic

Total 1 information showed

 

End to show arp table information

 

3P@C Installation Manual

Page 7-17

Reproduction and communication in any form prohibited without the written permission of

SAGEM SA