SAGEM 3P@C
For example: |
|
|
3P@C(config)# show version 6 | ||
6 Version Information | ||
Board | Type : ADU_GS_32 | |
Hardware | Version : V0.2: | |
FPGA | Version : A1.3 | |
CPLD | Version : 1.0 | |
ADU Serial | Number : | |
ADU Firmware Version : X3727 | ||
ADU Vendor | ID : GSPN | |
7.3.2.Viewing the Current Configuration
Operation Guide
Execute the command show
The result contains the configuration commands and parameters of all modules.
7.3.3.Querying the Port Status
Operation Guide
Execute the command show port [<portlist>allactive] to query the status information of all ports or specified ports, including the up/down state, port rate, duplex, flow control and
Reference index
The Up/Down state is consistent with the indication in the panel indicator. The rate, duplex, flow control and self- negotiation mode of the port are all correct.
For example: View the status of Port 7:7. 3P@C(config)# show port 7:7
Port:<7:7> 's Current Value Information |
| ||||
Link state | : Up | Port state | : enabled | ||
Port Default VLAN ID : 2374 | Port VLAN name | : dsl2374 | |||
Remote modem connection | : YES |
|
| ||
Service Mode | : G.dmt | Channel | Mode | : Interleaved | |
|
|
|
|
| |
3P@C Installation Manual |
|
|
|
| |
Page | Reproduction and communication in any form prohibited without the written permission of |
SAGEM SA