SAGEM 3P@C

Figure 2-23 Front view of the DS-2FSM module

DS-2FSM 100M interface module

SC single-mode optical interface

Status

LED

The front panel of the DS-2FSM module is composed of the following parts:

„2 standard SC 100M single-mode optical interfaces

„2 LINK status indicator

„2 ACT status indicator

Of the above, the different states of LINK and ACT indicators show the port operating status. For details, refer to Table 2-15.

1.1.1.21Indicators of the DS-2FSM module

Table 2-15 Status definitions of the LINK and ACT LEDs on the DS-2FSM module

LED

Color

Display

Description

state

 

 

 

LINK

Green

Solid on

After a stable connection between a port and the

 

 

 

equipment is established, the indicator of the port

 

 

 

stays solid on.

 

 

Off

The link on the port is down.

ACT

Yellow

Flashing

Data are being received/transmitted on the

 

 

 

optical port.

 

 

Off

No data are being received/transmitted on the

 

 

 

optical port.

1.1.1.22Interface features of the DS-2FSM module

Table 2-16 Interface features of the DS-2FSM module

Module

Quantity

Interface

Interface

Fiber

 

Transmission

type

of

type

attributes

specifications

distance

 

interfaces

 

 

 

 

 

DS-

2

SC

100Base-

9µm

single-

15km

2FSM

 

 

FSM

mode fiber

 

3P@C Installation Manual

Page 2-20

Reproduction and communication in any form prohibited without the written permission of SAGEM SA