CHAPTER 14
14.Operation Instructions for the Auxiliary Devices
14.1.Use of AC/DC Converter
In usual cases, 3P@C 4450E uses the DC
1. For the detailed description of HD4825, refer to HD4825 Rectification Module Use. Here, the connection of power supply for the
Hammmer10000 AC power supply is the main concern.
prompt 2. Other 4825 converters can also be used.
The procedure of power supply connection in the 3P@C 4450E AC power supply is as follows:
Step 1 |
| For 3P@C 4450EV2.00, | |
|
|
| Use the cable connector matched with HD4825, and connect the “+” pole |
|
|
| (red wire) for the HD4825 DC output with the BGND (black wire) for |
|
|
| 3P@C 4450E DC power input wire connector; connect the |
|
|
| wire) for HD4825 DC output with |
|
|
| power input wire connector. |
|
|
| For 3P@C 4450EV1.00, |
|
|
| Use the cable connector matched with HD4825, and connect the “+” |
|
|
| pole (red wire) for the HD4825 DC output with the BGND (black wire) |
| prompt |
| for 3P@C 4450E DC power input wire connector; connect the |
|
|
| (black wire) for HD4825 DC output with |
|
|
| 4450E0 DC power input wire connector. |
Step 2 |
| Insert the 3P@C 4450E DC power input wire connector into the | |
|
|
| corresponding connector of 3P@C 4450E backplane, and insert the |
|
|
| HD4825 connector into the DC output port at the back of HD4825. The |
|
|
| description of 3P@C 4450E backplane power connector ad the DC |
|
|
| output port at the back of HD4825 is shown in Figure |
Step 3 |
| Connect the 220V AC power supply to HD4825, as shown in Figure 14- | |
|
| 2. |
3P@C Installation Manual
Reproduction and communication in any form prohibited without the written permission of SAGEM SA