SAGEM 3P@C

1.1.1.34Packing box of accessories

The packing box of accessories uses a small carton. Inside it there are a User Manual, a user registration/warranty card, an antistatic wrist strap, subscriber cables and suite of packing materials.

1.1.1.35Packing box of boards

The packing box of boards usually adopts a carton. Inside the packing box, there are packing materials such as foam pad, antistatic plastic bag and desiccants. After opening the carton, wear an antistatic wrist strap first before taking the board out of the antistatic bag.

 

1. If a board is moved from a place with low temperature

 

and low humidity to another place with high temperature and

 

high humidity, you have to wait at least 30 minutes before

 

unpacking it so as to avoid damages to the board caused by

 

the moisture condensed on the board surface.

Note

 

2.You must wear an antistatic wrist strap before taking out the board to avoid damage.

1.1.1.36Cabinet packing box

The assembly wooden box is used as the packing box of the cabinet. It is connected and fixed with plastic clips. Figure 3-4 shows its outside view. Inside the packing box, there are packing materials such as foam pad, plastic bag, desiccant, cabinet, marking template and cabinet installation instructions. The cabinet is placed in the antistatic plastic bag. Its upper edge, bottom edge and all the corners are protected with the foam pads, and the foam pads are connected and fixed with paper boards. Inside the cabinet there are guide rails.

Figure 3-4 Appearance of the cabinet packing box

3P@C Installation Manual

Page 3-12 Reproduction and communication in any form prohibited without the written permission of SAGEM SA