SAGEM 3P@C
Figure
Installation on the cement floor
Cabinet
positioning
Cabinet leveling
Cabinet fixation
Insulation test
Test passed?
End the
installation
1.1.1.37Position the cabinet
A. Marking
Decide the positions to install the expansion bolts according to the reference size and the positions of the feet in the construction plane design drawings. Determine the mounting hole positions of the 2.2m cabinet and locate the mounting hole positions of the feet with a marking template. (Note that the marking template is made of rigid paper boards, placed in the packing wooden box of the 2.2 m standard cabinet and delivered along with the cabinet). To avoid errors, repeat the measurement against the installation hole location diagram after all the hole positions have been marked and make sure their sizes are correct. Figure
3P@C Installation Manual
Page