SAGEM 3P@C
3P@C(config)# upload ftp
Trying to upload file to ftp server, please wait...
Successfully finished uploading file.
Finished.
You've successfully uploaded
7.2.3.Loading the Configuration File
If the user’s several devices with the same configuration need to be configured, you can edit the configuration file of any of the devices offline in the prescribed format, and transfer the configuration file to the device through the FTP server. To validate the new configuration file, you must reboot the device.
Configuration procedure:
Step 1 First enable the FTP server and set the user name and password. For example, the user name is “ftpuser”, the password is “123”, and the configuration file is named “config.txt”.
Step 2 Download the configuration file in 3P@C 4450E.
3P@C(config)#download ftp
Step 3 Reset the system
3P@C(config)# reboot
7.2.4.Erasing the Configuration File
You can clear the configuration file by executing the command erase. After the configuration file is erased, the equipment will use default configuration parameters for initialization upon next
System upgrade
The configuration file is damaged.
A mistaken configuration file is loaded. Configuration procedure:
Step 1 | erase | Erase the configuration file from |
|
| the storage media |
7.3.Querying the Maintenance Information
7.3.1. Querying the Current Software Version
Operation Guide
Execute the command show version
Reference index
The version information of the system software must be correct. The software versions (3P@COS(tm) Version) of all cards must be consistent with one another. The HardwareVersion and SerialNo. must be consistent with those of the cards.
3P@C Installation Manual
Page | Reproduction and communication in any form prohibited without the written permission of |
SAGEM SA