SAGEM 3P@C

7.3.7.Viewing the Route Information

Operation Guide

You can execute the command show ip route to query route information: Whether the route table is correct, whether the configured static route and OSPF/RIP route have been learned or not, and whether the route is selected correctly or not.

Reference index For example: 3P@C(config)# show ip route

Codes: C - connected, S - static, R - RIP, O - OSPF > - selected route, * - selected nexthop

S>* 0.0.0.0/0 [1/0] via 10.16.0.254, 3P@C

C>* 2.2.2.0/24 is directly connected, pppoe1

C>* 10.0.0.0/16 is directly connected, uplink

C>* 10.10.1.0/24 is directly connected, server2

S10.10.1.0/24 [1/0] via 10.11.1.254 inactive C>* 10.16.0.0/16 is directly connected, 3P@C C>* 12.1.0.0/16 is directly connected, server C>* 192.168.0.0/16 is directly connected, adsl S>* 192.168.2.0/24 [1/0] via 192.168.1.3, adsl

7.3.8. Querying the System Running Time

Operation Guide

You can execute the command show running-timeto query the system running time. Reference index

The Current system time is consistent with Beijing time. The Running_time is correct. For example:

3P@C(config)# show running-time

Running time is:0 days 1 hours 51 minutes 45 seconds

7.4. Handling Password Loss

Before equipment delivery, the default login user name is “admin”, the default password is “3P@C”, and the default password for entering the configuration mode is also “3P@C”. If the user modifies the above password, the user must bear the new password in mind. If forgetting the new password, the user can follow the procedures below:

Step 1: Power on the equipment, and press and hold <Space> to enter the BootROM menu. Select “g” (Boot an executable image) to skip over password check.

3P@C Installation Manual

Page 7-18

Reproduction and communication in any form prohibited without the written permission of

SAGEM SA