Siemens P 115, Y02, Setting of pressure indicator in pressure Y21 Units, Y221 Non-pressure units

© Siemens AG 2008

SITRANS P measuring instruments for pressure

Transmitters for gage, absolute and differential pressure, flow and level

DS III series for differential pressure and flow

Selection and Ordering data				Order code
Additional data					HART	PA	FF
Add "-Z" to Order No. and specify Order code.
Measuring range to be set
Specify in plain text:								2
• With linear characteristic (max. 5 digits):
				Y01	￿
Y01: ... up to ... mbar, bar, kPa, MPa, psi
• With square-rooted characteristic (max. 5				Y02	￿
digits):
Y02: ... up to ... mbar, bar, kPa, MPa, psi
Measuring point number (TAG No.)				Y15	￿	￿	￿
Max. 16 char., specify in plain text: Y15:
Measuring point text				Y16
					￿	￿	￿
Max. 27 char., specify in plain text: Y16:
Entry of HART address (TAG)				Y17	￿
Max. 8 char., specify in plain text: Y17:
Setting of pressure indicator in pressure				Y21
					￿	￿	￿
units
Specify in plain text (standard setting: mA):
Y21: mbar, bar, kPa, MPa, psi, ...
Note:
The following pressure units can be selected:
bar, mbar, mm H	O*), inH O*), ftH	2	O*),
2	2
mmHG, inHG, psi, Pa, kPa, MPa, g/cm2,
kg/cm2, Torr, ATM oder %
*) ref. temperature 20 °C
Setting of pressure indicator in				Y221)	￿
non-pressure units				+
Specify in plain text:				Y01 or
Y22: ..... up to ..... l/min, m3/h, m, USgpm, ...				Y02
(specification of measuring range in pressure
units "Y01" or "Y02" is essential, unit with
max. 5 characters)
Preset bus address				Y25		￿
(possible between 1 and 126)
Specify in plain text:
Y25:

Only "Y01", "Y21", "Y22", "Y25" and "D05" can be factory preset

￿= available

1)Not together with over-filling safety device for flammable and non-flammable liquids (Order code "E08")

Siemens FI 01 · 2009

2/115