Siemens P 130, Y221 Non-pressure units + Y01, Mounting flange F 4 9 1, Tube length

© Siemens AG 2008

SITRANS P measuring instruments for pressure

Transmitters for gage, absolute and differential pressure, flow and level

DS III series for level

		Selection and Ordering data						Order code
		Additional data							HART	PA	FF
		Add "-Z" to Order No. and
		specify Order code.
2		Measuring range to be set						Y01	￿
		Specify in plain text (max. 5 digits):
		Y01: ...	up to ... mbar, bar, kPa, MPa, psi
		Measuring point number (TAG No.)						Y15
									￿	￿	￿
		Max. 16 characters, specify in plain text:
		Y15:
		Measuring point text						Y16	￿	￿	￿
		Max. 27 characters, specify in plain text:
		Y16:
		Entry of HART address (TAG)						Y17	￿
		Max. 8 characters, specify in plain text:
		Y17:
		Setting of pressure indicator in pressure						Y21	￿	￿	￿
		units
		Specify in plain text (standard setting: mA):
		Y21: mbar, bar, kPa, MPa, psi, ...
		Note:
		The following pressure units can be selected:
		bar, mbar, mm H		2	O*), inH O*), ftH	2	O*),
					2
		mmHG, inHG, psi, Pa, kPa, MPa, g/cm2,
		kg/cm2, Torr, ATM or %
	*) ref. temperature 20 °C
		Setting of pressure indicator in						Y221)	￿
		non-pressure units						+ Y01
		Specify in plain text:
		Y22:	up to		l/min, m3/h, m, USgpm, ...
		(specification of measuring range in
		pressure units "Y01" is essential, unit with
		max. 5 characters)
		Preset bus address						Y25		￿
		(possible between 1 and 126)
		Specify in plain text:
		Y25:
		Only "Y01", "Y21", "Y22", "Y25" and "D05" can be factory preset
		￿ = available

1)Not together with over-filling safety device for flammable and non-flammable liquids (Order code "E08")

Selection and Ordering data Order No.Ord. code

Mounting flange		7 M F 4 9 1 2 -
Directly mounted on the		3 7777	777
SITRANS P pressure transmitter (converter part)
for level, for DS III series
Connection acc. to EN 1092-1
Nom. diam.	Nom. press.
DN 80	PN 40	D
DN 100	PN 16	G
	PN 40	H
Connection acc. to ASME B16.5
Nom. diam.	Nom. press.
3 inch	Class 150	Q
	Class 300	R
4 inch	Class 150	T
	Class 300	U
Other version, add		Z	J 1 Y
Order code and plain text:
Nominal diameter: ...; Nominal pressure: ...
Wetted parts materials
• Stainless steel 316L		A
- Coated with PFA		D
- Coated with PTFE		E 0
- Coated with ECTFE1)		F
• Monel 400, mat. No. 2.4360		G
• Hastelloy B2, mat. No. 2.4617		H
• Hastelloy C276, mat. No. 2.4819		J
• Hastelloy C4, mat. No. 2.4610		U
• Tantalum		K
Other version, add		Z	K 1 Y
Order code and plain text:
material of parts in contact with the medium: ...
Sealing face, see "Technical specifications"
Tube length
• Without		0
• 50 mm	(1.97 inch)	1
• 100 mm	(3.94 inch)	2
• 150 mm	(5.90 inch)	3
• 200 mm	(7.87 inch)	4
Other version: add		9	L 1 Y
Order code and plain text:
Tube length: ...
Filling liquid
• Silicone oil M5		1
• Silicone oil M50		2
• High-temperature oil		3
• Halocarbon oil (for O2 measurements)		4
• Glycerin / water2)		6
• Food oil (FDA-listed)		7
Other version, add		9	M 1 Y
Order code and plain text:
filling liquid: ...

1)For vacuum on request

2)Not suitable for use in low-pressure range

2/130

Siemens FI 01 · 2009