Siemens P technical specifications Additional data

© Siemens AG 2008

SITRANS P measuring instruments for pressure

Transmitters for gage, absolute and differential pressure, flow and level

DS III series for gage and absolute pressure, with front-flush diaphragm

Selection and Ordering data	Order code
Further designs		HART	PA	FF
Add "-Z" to Order No. and specify Order
code.
Sanitary process connection to NEUMO
Connect S flange connection
certified to EHEDG
• DN 50, PN 16	Q63	￿	￿	￿
• DN 65, PN 10
	Q64	￿	￿	￿
• DN 80, PN 10	Q65	￿	￿	￿
• DN 100, PN 10	Q66	￿	￿	￿
• DN 2“, PN 16	Q72	￿	￿	￿
• DN 2½“, PN 10	Q73	￿	￿	￿
• DN 3“, PN 10
	Q74	￿	￿	￿
• DN 4“, PN 10	Q75	￿	￿	￿
Aseptic threaded socket to DIN 11864-1
Form A
• DN 50, PN 25	N33	￿	￿	￿
• DN 65, PN 25	N34	￿	￿	￿
• DN 80, PN 25	N35	￿	￿	￿
• DN 100, PN 25	N36	￿	￿	￿
Aseptic flange with notch to DIN 11864-2
Form A
• DN 50, PN 16	N43	￿	￿	￿
• DN 65, PN 16	N44	￿	￿	￿
• DN 80, PN 16	N45	￿	￿	￿
• DN 100, PN 16	N46	￿	￿	￿
Aseptic flange with groove to DIN 11864-2
Form A
• DN 50, PN 16	N43 +	￿	￿	￿
	P11
• DN 65, PN 16	N44 +	￿	￿	￿
	P11
• DN 80, PN 16	N45 +	￿	￿	￿
	P11
• DN 100, PN 16
	N46 +	￿	￿	￿
	P11
Aseptic clamp with groove to DIN 11864-3
Form A
• DN 50, PN 25	N53	￿	￿	￿
• DN 65, PN 25	N54	￿	￿	￿
• DN 80, PN 16	N55	￿	￿	￿
• DN 100, PN 16	N56	￿	￿	￿

1)Special Viton seal included in delivery.

2)Lower measuring limit -100 mbar g (1.45 psi g).

3)The weldable socket can be ordered under accessories

4)The maximum temperatures of the medium depend on the respective cell fillings.

Selection and Ordering data	Order code
Additional data		HART	PA	FF
Add "-Z" to Order No. and specify Order
code.
Measuring range to be set	Y01	￿
				2
Specify in plain text (max. 5 digits):
Y01: ... up to ... mbar, bar, kPa, MPa, psi
Measuring point number (TAG No.)	Y15	￿	￿	￿
Max. 16 characters, specify in plain text:
Y15:
Measuring point text	Y16	￿	￿	￿
Max. 27 characters, specify in plain text:
Y16:
Setting of pressure indicator in pressure	Y21	￿	￿	￿
units

Specify in plain text (standard setting: mA):

Y21: mbar, bar, kPa, MPa, psi, ...

Note:

The following pressure units can be selected: bar, mbar, mm H2O*), inH2O*), ftH2O*), mmHG, inHG, psi, Pa, kPa, MPa, g/cm2, kg/cm2, Torr, ATM oder %

*) ref. temperature 20 °C

Preset bus address	Y25	￿
(possible between 1 and 126)
Specify in plain text:
Y25:
Only "Y01" and "Y21" can be factory preset
￿ = available

Ordering example

Item line:	7MF4133-1DB20-1AB7-Z
B line:	A22 + Y01 + Y21
C line:	Y01: 1 ... 10 bar (14.5 ... 145 psi)
C line:	Y21: bar (psi)

Siemens FI 01 · 2009

2/85