Siemens P Q63, Q64, Q65, Q66, Q72, Q73, Q74, Q75 Aseptic threaded socket to DIN Form a, N33, N34

© Siemens AG 2008

SITRANS P measuring instruments for pressure

Transmitters for food, pharmaceuticals and biotechnology

SITRANS P300 for gage and absolute pressure

	Selection and Ordering data	Order code
	Further designs		HART	PA	FF
	Add "-Z" to Order No. and specify Order
	code.
2	Sanitary process connection to
	NEUMO Connect S flange connection
	certified to 3A and EHEDG
	• DN 50, PN 16	Q63	￿	￿	￿
	• DN 65, PN 10	Q64	￿	￿	￿
	• DN 80, PN 10
		Q65	￿	￿	￿
	• DN 100, PN 10	Q66	￿	￿	￿
	• DN 2“, PN 16	Q72	￿	￿	￿
	• DN 2½“, PN 10	Q73	￿	￿	￿
	• DN 3“, PN 10	Q74	￿	￿	￿
	• DN 4“, PN 10
		Q75	￿	￿	￿
	Aseptic threaded socket to DIN 11864-1
	Form A
	• DN 50, PN 25	N33	￿	￿	￿
	• DN 65, PN 25	N34	￿	￿	￿
	• DN 80, PN 25	N35	￿	￿	￿
	• DN 100, PN 25	N36	￿	￿	￿
	Aseptic flange with notch to DIN 11864-2
	Form A
	• DN 50, PN 16	N43	￿	￿	￿
	• DN 65, PN 16	N44	￿	￿	￿
	• DN 80, PN 16	N45	￿	￿	￿
	• DN 100, PN 16
		N46	￿	￿	￿
	Aseptic flange with groove to DIN 11864-2
	Form A
	• DN 50, PN 16	N43 +	￿	￿	￿
		P11
	• DN 65, PN 16
		N44 +	￿	￿	￿
		P11
	• DN 80, PN 16	N45 +	￿	￿	￿
		P11
	• DN 100, PN 16
		N46 +	￿	￿	￿
		P11
	Aseptic clamp with groove to DIN 11864-3
	Form A
	• DN 50, PN 25	N53	￿	￿	￿
	• DN 65, PN 25	N54	￿	￿	￿
	• DN 80, PN 16	N55	￿	￿	￿
	• DN 100, PN 16	N56	￿	￿	￿

1)When the manufacture’s certificate M (calibration certificate) has to be ordered for transmitters with diaphragm seals, it is recommended only to order this certificate exclusively with the diaphragm seals. The measuring accuracy of the total combination is certified here.

2)Whe the acceptance test certificate 3.1 for transmitters with direct-con- nected diaphragm seals is ordered, this certificate must also be ordered with the corresponding seals.

3)Special Viton seal included in delivery.

4)Lower measuring limit -100 mbar g (1.45 psi g).

5)The weldable socket can be ordered under accessories

6)Certified to 3A.

The maximum temperatures of the medium depend on the respective cell fillings.

7)3A certification only if used in conjunction with 3A-compliant sealing rings.

	Selection and Ordering data					Order code
	Additional data						HART	PA	FF
	Add "-Z" to Order No. and specify Order
	code.
	Measuring range to be set					Y01	￿
	Specify in plain text V (max. 5 digits):
	Y01: ... up to ... mbar, bar, kPa, MPa, psi
	Measuring point number (TAG No.)					Y15
							￿	￿	￿
	Max. 16 characters, specify in plain text:
	Y15:
	Measuring point text					Y16
							￿	￿	￿
	Max. 27 characters, specify in plain text:
	Y16:
	Entry of HART TAG					Y17	￿
	Max. 8 characters, specify in plain text:
	Y17:
	Setting of pressure indication in pressure					Y21	￿	￿	￿
	units
	Specify in plain text (standard setting: mA):
	Y21: mbar, bar, kPa, MPa, psi, ...
	Note:
	The following pressure units can be selected:
	bar, mbar, mm H O*), inH	2	O*), ftH	2	O*),
2
	mmHG, inHG, psi, Pa, kPa, MPa, g/cm2,
	kg/cm2, Torr, ATM or %
*) ref. temperature 20 °C
	Setting of pressure indicator in					Y22 +	￿
	non-pressure units					Y01
	Specify in plain text:
	Y22: ..... up to ..... l, m3, m, USg, ...
(specification of measuring range in pressure
units "Y01" is essential, unit with max. 5 char-
acters)
	Preset bus address					Y25
								￿	￿
	possible between 1 ... 126)
	Specify in plain text:
	Y25:
	Only "Y01" and "Y21" can be factory preset
	￿ = available

Ordering example

Item line:	7MF8023-1DB24-1AB7-Z
B line:	A02 + Y01 + Y21
C line:	Y01: 1 ... 10 bar (14.5 ... 145 psi)
C line:	Y21: bar (psi)

2/42

Siemens FI 01 · 2009