Siemens technical specifications 180, For Sitrans P pressure transmitters for

© Siemens AG 2008

SITRANS P measuring instruments for pressure

Quick-release clamp-on seals

For pressure and absolute pressure

Selection and Ordering data		Order No. Ord. code
Quick-release clamp-on seal	D)	7	M F 4 9 5	0	-
for SITRANS P pressure transmitters for		77 A 0 7 - 7 B 777
pressure
7MF4037 and 7MF4237 together with Order

2code "V01" (vacuum-proof design) and 7MF80271); must be ordered separately

Filling liquid: Food oil (FDA listed)

Material: Stainless steel 316L

Nom. diam. Nom. press.

• Connection to DIN 11851 with screw necks

- DN 25	PN 40	2 B
- DN 40	PN 40	2 D
- DN 50	PN 25	2 E
- DN 65	PN 25	2 F
- DN 80	PN 25	2 G
- DN 100	PN 25	2 H
• Clamp connection
- 1½ inch	PN 40	4 L
- 2 inch	PN 40	4 M
- 2½ inch	PN 40	4 N
- 3 inch	PN 40	4 P
Other version
Add Order codes and plain text:
Nominal diameter: ...		9	H 1 Y
Nominal pressure: ...		Z	J 1 Y
Filling liquid
• Glycerin/water2)		6
• Food oil (FDA listed)		7
Other version		9	M 1 Y
Add Order code and plain text:
Filling liquid: ...
Connection to transmitter
• Direct			0

Through capillary, length:3)
• 1.0 m	(3.28 ft)	2
• 1.6 m	(5.25 ft)	3
• 2.5 m	(8.20 ft)	4
• 4.0 m	(13.1 ft)	5
• 6.0 m	(19.7 ft)	6
• 8.0 m	(26.25 ft)	7
• 10.0 m	(32.8 ft)	8
Other version		9
			N	1 Y
Add Order code and plain text:
Length of capillary: ...

1)With 7MF8027 and the measuring cells Q, S, T and U also order the vac- uum-tight version.

2)Not suitable for use in low-pressure range.

3)Max. capillary length, see section "Technical description"

D) Subject to export regulations AL: N, ECCN: EAR99H.

Selection and Ordering data	Order code
Further designs
Please add "-Z" to Order No. and specify Order code.
Quality inspection certificate (Factory calibration) to	C11
IEC 60770-2
Acceptance test certificate	C12
to EN 10204, section 3.1
Vacuum-proof design	V01
for use in low-pressure range

2/180

Siemens FI 01 · 2009