Siemens Pressure transmitter with mounting Bracket made, A01, A02 Plug, A30, Use on zone E02

© Siemens AG 2008

SITRANS P measuring instruments for pressure

Transmitters for gage, absolute and differential pressure, flow and level

DS III series

for gage pressure

	Selection and Ordering data	Order code
	Further designs		HART	PA	FF
	Add "-Z" to Order No. and specify Order code.
	Pressure transmitter with mounting
2	bracket made of:
	• Steel	A01	￿	￿	￿
	• Stainless steel	A02	￿	￿	￿
	Plug
	• Han 7D (metal, gray)	A30	￿
	• Han 8U (instead of Han 7D)	A31	￿
	Cable sockets for M12 connectors (metal)	A50	￿	￿	￿
	Rating plate inscription
	(instead of German)
	• English	B11	￿	￿	￿
	• French
		B12	￿	￿	￿
	• Spanish	B13	￿	￿	￿
	• Italian	B14	￿	￿	￿
	English rating plate
		B21	￿	￿	￿
	Pressure units in inH2O or psi
	Quality inspection certificate (Factory cali-	C11	￿	￿	￿
	bration) to IEC 60770-21)
	Acceptance test certificate2)	C12	￿	￿	￿
	To EN 10204-3.1
	Factory certificate	C14
			￿	￿	￿
	To EN 10204-2.2
	"Functional Safety (SIL)" certificate	C20	￿
	"PROFIsafe“ certificate and protocol
		C21		￿
	Setting of upper limit of output signal to	D05	￿
	22.0 mA
	Manufacturer's declaration acc. to NACE	D07	￿	￿	￿
	Type of protection IP68	D12	￿	￿	￿
	(not together with 7D/
	Han 8U plug, cable gland Pg 13.5)
	Digital indicator alongside the input keys	D27
			￿	￿	￿
	(only together with the devices 7MF4033-
	....0-.A .6 or -.A.7-Z, Y21 or Y22 + Y01)
	Supplied with oval flange
		D37	￿	￿	￿
	(1 item), PTFE packing and screws in thread
	of oval flange
	Use in or on zone 1D/2D	E01
			￿	￿	￿
	(only together with type of protection
	"Intrinsic safety (EEx ia)")
	Use on zone 0	E02
			￿	￿	￿
	(only together with type of protection
	"Intrinsic safety (EEx ia)")
	Oxygen application	E10
			￿	￿	￿
	(max. 120 bar g (1740 psi g) at 60°C (140 °F)
	for oxygen measurement and inert liquid)
	Explosion-proof "Intrinsic safety" to	E25
			￿	￿	￿
	INMETRO (Brazil)
	(only for transmitter 7MF4...-.....-.B..)
	Explosion-proof "Intrinsic safety" to	E55
			￿	￿	￿
	NEPSI (China)
	(only for transmitter 7MF4...-.....-.B..)
	Explosion protection "Explosion-proof" to	E56
			￿	￿	￿
	NEPSI (China)
	(only for transmitter 7MF4...-.....-.D..)
	Explosion-proof "Zone 2" to NEPSI (China)	E57
			￿	￿	￿
	(only for transmitter 7MF4...-.....-.E..)

Selection and Ordering data	Order code
Additional data		HART	PA	FF
Add "-Z" to Order No. and specify Order
code.
Measuring range to be set	Y01	￿
Specify in plain text (max. 5 digits):
Y01: ... up to ... mbar, bar, kPa, MPa, psi
Measuring point number (TAG No.)	Y15	￿	￿	￿
Max. 16 characters, specify in plain text:
Y15:
Measuring point text	Y16
		￿	￿	￿
Max. 27 characters, specify in plain text:
Y16:
Entry of HART address (TAG)	Y17	￿
Max. 8 characters, specify in plain text:
Y17:
Setting of pressure indication in pressure	Y21	￿	￿	￿
units

Specify in plain text (standard setting: mA):

Y21: mbar, bar, kPa, MPa, psi, ...

Note:

The following pressure units can be selected: bar, mbar, mm H2O*), inH2O*), ftH2O*), mmHG, inHG, psi, Pa, kPa, MPa, g/cm2, kg/cm2, Torr, ATM oder %

*) ref. temperature 20 °C

Setting of pressure indication in	Y22 +	￿
non-pressure units	Y01
Specify in plain text:
Y22: ..... up to ..... l/min, m3/h, m, USgpm, ...
(specification of measuring range in
pressure units "Y01" is essential, unit with
max. 5 characters)
Preset bus address	Y25		￿
(possible between 1 and 126)
Specify in plain text:
Y25:

Only "Y01", "Y21", "Y22", "Y25" and "D05" can be factory preset

￿= available

Ordering example

Item line:	7MF4033-1EA00-1AA7-Z
B line:	A01 + Y01 + Y21
C line:	Y01: 10 ... 20 bar (145 ... 290 psi)
C line:	Y21: bar (psi)

1)When the manufacture’s certificate M (calibration certificate) has to be ordered for transmitters with diaphragm seals, it is recommended only to order this certificate exclusively with the diaphragm seals. The measuring accuracy of the total combination is certified here.

2)Whe the acceptance test certificate 3.1 for transmitters with direct-con- nected diaphragm seals is ordered, this certificate must also be ordered with the corresponding seals.

2/76

Siemens FI 01 · 2009