Star Micronics NX-15 user manual Sends a one-time reverse feed Inch

1-

149

PURPOSE

CODE

(decimal ASCII)

(hex ASCII)

REMARKS

SEE

PURPOSE

CODE

(decimal ASCII)

(hex ASCII)

REMARKS

SEE

Sends a one-time reverse feed of

n/216 inch.

(ESC) <<.9> n

27 1;6 n

IB 6A n

This command causes the printer to reverse the paper n/216 inch. It does not change the current value of line spacing and it does not cause a carriage return. The value of n must be between O and 255.

Chapter 5

Sets print position to n lines.

(ESC) “f” 1 n

27 102 1 n

IB 66 01 n

This command sets the next print posi- tion to the nth line from the top of the cur- rent page.

NOTE: The character “l” (decimal code 49, hexadecimal code 31) can be used instead of ASCII 1.

Chapter 5

■Form feed and related commands

PURPOSEAdvances the paper to the top of

the next page (form feed).

CODE

(decimal ASCII)

(hex ASCII)

REMARKS

SEE

(FF)

12 Oc

The actual length of a page ejected by a form feed is set either by setting of the DIP switch 1-1 or through various codes (see below). This command works as the paper eject command when the optional automatic sheet feeder is installed.

Chapter 5