Star Micronics NX-15 user manual Code ESC, N2 ml

PURPOSEPrints double-density graphics at

	double-speed.
CODE	(ESC)	“Y”	nl	n2 ml	m2
(decimal ASCII)	27	89	nl	n2 ml	m2
(hex ASCII)	IB	59	nl	n2 ml	m2
REMARKS	This command selects 120 dots-per-inch,
	column-scan, bit-image graphics mode at
	double-speed. The values of nl and n2
	are the same as in normal-density
	graphics. The correct number of
	graphics data bytes (ml, m2, etc.) must
	follow n2. The ASCII values of these
	bytes determine which pins are fired for
	each character.
SEE	Chapter 7
PURPOSE	Prints	quadruple-density
	graphics.
CODE	(ESC)	“Z”	nl	n2 ml	m2
(decimal ASCII)	27	90	nl	n2 ml	m2
(hex ASCII)	IB	5A	nl	n2 ml	m2
REMARKS	This command selects 240 dots-per-inch,
	column-scan, bit-image graphics mode.
	The values of nl and n2 are the same as
	in normal-density graphics. The correct
	number of graphics data bytes (ml, m2,
	etc.) must follow n2. The ASCII values
	of these bytes determine which pins are
	fired for each character.
SEE	Chapter 7

.—