Star Micronics NX-15 user manual IB 3E, Code ESC

166
OTHER COMMANDS
PURPOSE	Sets the value of the eighth data
	bit to logical 1.

CODE

(decimal ASCII) (hex ASCII)

REMARKS

(ESC) “)”

2762

IB 3E

This command forces the eighth data bit of each subsequent character sent to the printer to logical 1. This code allows users with a 7-bit interface to access those characters whose ASCII code is greater than 127. This code should not be used to transmit printer control codes.

SEE	Chapter 6
PURPOSE	Sets the value of the eighth data
	bit to logical O.
CODE	(ESC)	“= “
(decimal ASCII)	27	61
(hex ASCII)	IB	3D
REMARKS	This command forces the eighth data bit
	of each subsequent character sent to the
	printer to logical O.This code should not
	be used to transmit printer control code.
SEE	Chapter 6