PURPOSEMoves the print head to the next
horizontal tab position.
CODE | (HT) |
|
|
|
|
(decimal ASCII) | 9 |
|
|
|
|
(hex .ASCII) | 09 |
|
|
|
|
REMARKS | This command causes the print head to | ||||
| advance to the next horizontal tab posi- | ||||
| tion. The horizontal tab positions are set | ||||
| at | ||||
| etc. (to the maximum print position). | ||||
SEE | Chapter 5 |
|
|
| |
PURPOSE | Sets horizontal tab positions. | ||||
CODE | (ESC) | “D” | nln2n3... | O | |
(decimal ASCII) | 27 | 68 | nln2n3... | O | |
(hex ASCII) | IB | 44 | nln.Zz3... | 00 | |
REMARKS | This command cancels all current | ||||
| horizontal tab positions and sets those | ||||
| defined at print positions nl, n2, n3, etc. | ||||
| The maximum number of horizontal tab | ||||
| positions allowed is 28. The ASCII O | ||||
| character is used as a command ter- | ||||
| minator. Each horizontal tab position | ||||
| must be specified in ascending order. | ||||
SEE | Chapter 5 |
|
|
| |
PURPOSE | Sets | horizontal | tab positions | ||
| every n characters. |
|
| ||
CODE | (ESC) | “e” | O | n |
|
(decimal ASCII) | 27 | 101 | 0 | n |
|
(hex ASCII) | IB | 65 | 00 | n |
|
REMARKS | This command cancels all current | ||||
| horizonal tab positions and sets those | ||||
| every n characters |
|
|
| |
| NOTE: The character “O”(decimal code | ||||
| 48, hexadecimal code 30) can be used | ||||
| instead of ASCII O. |
| |||
SEE | Chapter 5 |
