Star Micronics NX-15 user manual 123

Models: NX-15

1 210
Download 210 pages 57.72 Kb
Page 131
Image 131

123

1-2 This switch selects the default character style. If this switch is on the default character style is nor- mal draft characters. If this switch is off the default character style is Near Letter Quality (NLQ) characters. This switch is set on at the factory.

1-3 This switch selects the print style of zeroes. If this switch is on, normal zeroes are printed. If this switch is off, slashed zeroes are printed. This switch is set on at the factory.

1-4 This switch determines the default bottom margin. When this switch is on, the bottom margin is not set at power-on. When this switch is off, the bottom margin is automatically set to 1 inch. This switch is set on at the factory.

1-5 This switch disables the paper-out detector. If this switch is on, the printer will signal the computer when it runs out of paper and printing will stop. If this switch is off, the printer will ignore the paper- out detector and will continue printing. This switch is set on at the factory.

1-6 This switch controls the status of SELECT IN signal of the parallel interface. If this switch is on, this signal is held to LOW. If this switch is off, the signal goes HIGH when the printer cannot get data. This switch is set on at the factory.

1-7 This switch selects the default character set. If this switch is on, the default character set is character set #1. If this switch is off, the deafult character set is character set #2. If switch 2-5 is on, this switch have no effect: This switch is set on at the factory.

1-8 When this switch is on, the computer must send a line feed command each time to advance the paper. When this switch is off, the printer will automatical- ly advance the paper one line every time it receives a carriage return. (For example, most BASIC’s send a line feed with every carriage return; in this case, this switch should be on.) This switch is set on at the factory.

2-1 This switch controls the RAM. When this switch is on, the download character definitions are ignored and the RAM is used as a print buffer. When this switch is off, the download character definitions are

Page 131
Image 131
Star Micronics NX-15 user manual 123