Star Micronics NX-15 user manual Reverse the paper to the top of the cur

150
PURPOSE	Reverses	the paper to the top of
	the current page.
CODE	(ESC)	(FF)
(decimal ASCII)	27	12
(hex ASCII)	IB	Oc
REMARKS	This command causes the printer to
	reverse the paper to the top of the cur-
	rent printing page (or form). This com-
	mand is ignored when the optional
	automatic sheet feeder is installed.
SEE	Chapter 5

PURPOSESets page length to n inches.

CODE	(ESC)	“C”	O	n
(decimal ASCII)	27	67	0	n
(hex ASCII)	IB	43	00	n
REMARKS	This command sets the length of all
	subsequent pages to n inches. The value
	of n must be between 1 and 22. You can
	select a power-on default form length of
	11 inches or 12 inches by setting DIP
	switch 1-1. This command is ignored
	when the optional automatic sheet feeder
	is installed.
SEE	Chapter 5

PURPOSESets page length to n lines.

CODE	(ESC)	“c”	n
(decimal ASCII)	27	67	n
(hex ASCII)	IB	43	n

REMARKS	This command sets the length of all
	subsequent pages to n lines. The value of
	n must be between 1 and 255. This com-
	mand is ignored when the optional
	automatic sheet feeder is installed.
SEE	Chapter 5