Star Micronics NX-15 user manual Decimal Ascii 104 Hex Ascii

I

172

PURPOSEEnlarges characters in whole or in part; cancels same.

CODE	(ESC)	“h”	n
(decimal ASCII)	27	104	n
(hex ASCII)	IB	68	n
REMARKS	This	special	command enlarges

characters following the command until the enlargement is cancelled. The values of n have the following effects.

nEffect

oCancels enlargement

1 Double-high, double-wide

2Quadruple-high, quadruple-wide

3Double-high, double-wide (Lower half only)

4Double-high, double-wide (Upper half only)

5Quadruple-high, quadruple-wide (Lower half only)

6Quadruple-high, quadruple-wide (Upper half only)

SEE	Chapter 6
PURPOSE	Expands	the printable area.
CODE	(ESC)	“6”
(decimal ASCII)	27	54
(hex ASCII)	IB	36
REMARKS	This command causes the printer to use
	the high-order control code area as a
	printable character area when the DIP
	switch 2-5 is set on.
SEE	Chapter 6