Powering Off and On12 
This chapter contains information necessary to prepare the system for service.
Included are system power off and on, and external cable removal procedures.
Powering Off the System | page |
|
|
Removing the External Cables | page |
|
|
Restarting the System | page |
|
|
Reading Boot Messages | page |
|
|
12.1 Powering Off the System
Before turning off system power, halt the operating system as shown below. Failure to halt the operating system properly can cause the loss of disk drive data.
If you are troubleshooting system problems, you may find it convenient to reset the system or even cycle system power from the console. See Section 9.5.2, “Resetting and Power Cycling the System from a Remote Console,” on
page
12.1.1Enterprise 6000/5000 Cabinet Systems
1.Notify users that the system is going down.
2.Back up the system files and data to tape, if necessary.
