Sun Microsystems 6.0005E+11 manual Safety and Tools 11-3

11

AC	A terminal to which alternating
	current or voltage may be applied.
ON	The principal and stand-by switches
	are in the ON position; the system is
	powered on.
OFF	The principal switch is in the OFF
	position.
STAND-BY	The system is in standby mode and
	the operating system is halted. The
	circuit breaker can be turned off.
DIAGNOSTICS	System is powered on. If system is
	rebooted, POST will display extended
	diagnostic messages.
CYCLING	System or board is operating
	normally.
LOCKED	Board: 1/4-turn access slot is locked.
	System: running in secure mode and
	will not respond to commands from
	the console. The key can be removed.
UNLOCKED	Board 1/4-turn access slot is
	unlocked.
POWER	Board is receiving DC power.
SERVICE	System has detected a hardware
	failure.

Safety and Tools 11-3