Sun Microsystems 6.0005E+11 manual To replace the cable assembly

E

9.Disconnect the cable assembly from the front of the SCSI adapter assembly and remove the cable assembly.

See Figure E-6.

Figure E-6Removing the Cable Assemblies

From the Front of the SCSI Adapter Tray

To replace the cable assembly:

1.Connect the CD tray power or data cable assembly into the back of the SCSI tray.

See Figure E-5.

2.Pull the cable assembly through the opening in the cabinet to the front of the card cage.

The cable assembly runs through the front of the fan tray shelf and the system cabinet pillar to the SCSI adapter assembly.

3.Connect the cable assembly into the front of the SCSI adapter assembly. See Figure E-6.

E-10 Ultra Enterprise 6000/5000/4000 Systems Manual—November 1996