Sun Microsystems 6.0005E+11 manual To replace the key switch assembly

E

11.Gently remove the key switch assembly from the cabinet.

Pull out the right side first and gently rock the assembly until the left flange clears the cabinet. See Figure E-12.

Figure E-12Replacing the Key Switch Assembly in the

Enterprise 6000/5000 Systems

To replace the key switch assembly:

1.Insert the key switch assembly into the cabinet until it is seated properly. The key switch assembly is seated properly when the screw holes align with the cabinet pillar. See Figure E-12.

2.Replace the two screws on the right side that attach the key switch assembly to the cabinet pillar.

You can access the two screws through the space previously occupied by the SCSI tray. See Figure E-11.

Non-Chassis Field Replaceable Units (FRUs) E-17