3

3.5.4.1 Plastic Standoffs

Plastic standoffs lock the SBus and graphics (UPA) cards to the I/O boards. See Figure 3-14.

To unlock a standoff, pull up the tip insert.

To lock a standoff, first ensure that the module or card rests on the standoff flange, then press down the tip insert.

Standoff

SBus/graphics (UPA) cards

Standoff

Tip insert

Flange

LockedUnlocked

Figure 3-14Locking and Unlocking Standoffs

3.5.4.2Removing an SBus Card

1.Use the procedures in Section 3.5.2, “Removing a Board,” to remove the applicable I/O board.

2.Use Figure 3-13 to locate the card to be removed.

I/O Boards and Components

3-21

Page 93
Image 93
Sun Microsystems 6.0005E+11 manual Plastic Standoffs, Removing an SBus Card