Sun Microsystems 6.0005E+11 manual Reading Boot Messages, 8Front Panel Status LEDs Cabinet Server

12

12.4Reading Boot Messages

♦Use the boot software messages to verify the presence of options in the system. After POST completes the system self-test, a message similar to the following will appear on your screen. The message lists hardware detected in the system.

Note – The following screen display is only an example. The actual message displayed on the screen will vary with the software running on the system.

16-slot Ultra Enterprise 6000, Keyboard Present
OpenBoot	-.- FCS, --- MB memory installed, Serial #---		.
Ethernet	address -:-:--:-:--:--, Host ID: ------	.

If there is no terminal on this system, you must check the system status by inspecting LEDs on the front panel. See Figure 12-8 and Figure 12-9.

DC power (green)

Fault (yellow)

System running (green)

Figure 12-8Front Panel Status LEDs (Cabinet Server)

12-10 Ultra Enterprise 6000/5000/4000 Systems Manual—November 1996